Aluminum Auger

Aluminum Augur. Cast Aluminum. Powder coated. OA length 121/2 inches. Penetration depth approximately 101/2 inches. Fits poles from 1-1/4” to 2”.

Enfenetee Group Inc. offers the most revolutionary method of installing a post or pole without digging a hole or driving a stake. Vertical uprights such as fence, sign and flag poles, are typically installed by first digging a hole, mixing some concrete, putting the pole in the hole and then pouring the concrete and wait for it to set.

Enfenetee Group Inc. offers the most revolutionary method of installing a post or pole without digging a hole or driving a stake. Vertical uprights such as fence, sign and flag poles, are typically installed by first digging a hole, mixing some concrete, putting the pole in the hole and then pouring the concrete and wait for it to set.

Installation tools are a half (1/2) inch socket extension and socket wrench or 18v drill with 1/2 inch drive extension adapter, Rotate the auger in a clockwise manner. Once the auger is in deep enough to support your upright, select the proper collet set for secure fit around post/pole. Insert the upright and tighten the retaining cap.

Installation tools are a half (1/2) inch socket extension and socket wrench or 18v drill with 1/2 inch drive extension adapter, Rotate the auger in a clockwise manner. Once the auger is in deep enough to support your upright, select the proper collet set for secure fit around post/pole. Insert the upright and tighten the retaining cap.

Vertical upright mounted items should not exceed total combined weight of 30 pounds. Any insecurely mounted items on a post/pole are at risk of falling and causing possible harm or fatality.

  • Fencing
  • Bird House Poles
  • Signs
  • Tents
  • Farm & Ranch
  • Recreational Equipment
  • Flag, Light Poles
  • Inflatable
  • Patio Decking
  • Standards (banners, etc)
  • Umbrellas
  • Mailboxes